PLLA
– CE, GMP, ISO, KFDA Certificates.
– Perfect shape of cog(PLCL / PLLA) and mold(PLCL) by a mechanical dual-cut process.
– Safe FDA-approved material, which has been used in a large number of medical applications.
– Entirely absorbable by the human body’s immune system.
– Transparent – invisible through the skin.
– Fat cell reduction, reformation of collagen fibers, new blood vessel formation, activated metabolism in neighboring regions, increase in skin elasticity, reduction in muscles, brightening of the skin tone, and contraction of facial contours.
– Longest duration (longer lifting effect and volumizing effect).
– Strongest anchoring
– Causes almost no or very small amount of inflammatory reaction to the surrounding tissues compared to PDO.
– Even more effective at simulating collagen production than PDO.
Main Models
PLLA Main Models
The following models are only our main models. There are much more other models other than those listed down below.
If you are looking for some other specific models or need some customization (such as needle type, needle gauge, needle length, suture USP, suture length, needle hub type), please feel free to contact us.
Considering our stock condition, there could exist some MOQ (minimum order quantity) for our non-major models.
Supported Types
Model & Needle & Needle Hub
Supported Model
Type
Supported Needle
Type
- Back-cutting
- L-Cannula
- W-Cannula
- Blunt
- Sharp (only available in non-EU countries)
Supported Needle Hub
Type
- Short Hub
- Long Hub
- Assembly Hub
-
Plug Hub
Mono
1. PLLA Mono
* Default needle type : Back-cutting needle
* Default needle hub type : Short hub
Mono Back-cutting 27G 38mm 5-0 55mm (Major model)
Mono Back-cutting 27G 60mm 5-0 90mm (Major model)
Screw
2. PLLA Screw
* Default needle type : Back-cutting needle
* Default needle hub type : Long hub
Screw Back-cutting 27G 38mm 5-0 55mm (Major model)
Screw Back-cutting 27G 60mm 5-0 90mm (Major model)
Multi
3. PLLA Multi
* Default needle type : L-Cannula needle
* Default needle hub type : Assembly hub
Multi L-Cannula 23G 38mm 5-0 25mm (Major model)
Multi L-Cannula 23G 60mm 5-0 45mm (Major model)
Cog B (Cog)(Cog Base)
4. PLLA Cog B
* Default needle type : L-Cannula needle
* Default needle hub type : Assembly hub
* Default cog type : CB4 (Please refer to the list below)
* We usually manufacture Cogs in 4 ways.
CB1 (ST, Straight Type) – in one direction
CB2 – 2 directions in 180º degrees
CB3 – 3 directions in 120º degrees
CB4 (SP, Spiral Type) – 4 directions in 90º degress (Major type)
Cog-B L-Cannula 19G 38mm 2-0 120mm (Major model)
Cog-B L-Cannula 19G 60mm 2-0 140mm (Major model)
Cog-B L-Cannula 19G 100mm 2-0 180mm (Major model)
Cog-B L-Cannula 19G 38mm 2-0/0-0 120mm
Cog-B L-Cannula 19G 60mm 2-0/0-0 140mm
Cog-B L-Cannula 19G 100mm 2-0/0-0 180mm
Cog N (Cog Nose)
5. PLLA Cog N
* Default needle type : L-Cannula needle
* Default needle hub type : Assembly hub
* Default cog type : CB4 (Please refer to the list below)
* We usually manufacture Cogs in 4 ways.
CB1 (ST, Straight Type) – in one direction
CB2 – 2 directions in 180º degrees
CB3 – 3 directions in 120º degrees
CB4 (SP, Spiral Type) – 4 directions in 90º degress (Major type)
Cog-N L-Cannula 19G 38mm +2 52mm (Major model)
Cog-N L-Cannula 19G 60mm +2 82mm (Major model)
Cog-N L-Cannula 19/21G 38mm 0-0/+1/+2 52mm
Cog-N L-Cannula 19/21G 60mm 0-0/+1/+2 82mm