PDO

Poster - PDO

CE, GMP, ISO, KFDA Certificates.

Perfect shape of cog and mold by a mechanical dual-cut process.

Safe FDA-approved material that has been used as suture over 40 years and popular among the aesthetic clinics in the world.

Entirely absorbable by the human body’s immune system.

Highest initial strength and elongation.

Fat cell reduction, reformation of collagen fibers, new blood vessel formation, activated metabolism in neighboring regions, increase in skin elasticity, reduction in muscles, brightening of the skin tone, and contraction of facial contours.

Soft surface and smooth insertion.

Main Models

PDO Main Models

 The following models are only our main models. There are much more other models other than those listed down below.

If you are looking for some other specific models or need some customization (such as needle type, needle gauge, needle length, suture USP, suture length, needle hub type),  please feel free to contact us.

 Considering our stock condition, there could exist some MOQ (minimum order quantity) for our non-major models.

Supported Types

Model & Needle & Needle Hub

Supported Model
Type

Supported Needle
Type

Supported Needle Hub
Type

PDO Mono

Mono

1. PDO Mono

* Default needle type : Back-cutting needle

* Default needle hub type : Short hub

 

Mono Back-cutting 27G 38mm 5-0 55mm (Major model)

Mono Back-cutting 27G 60mm 5-0 90mm (Major model)

PDO Mono - Detail (Table)
PDO Screw

Screw

2. PDO Screw

* Default needle type : Back-cutting needle

* Default needle hub type : Long hub

 

Screw Back-cutting 27G 38mm 5-0 55mm (Major model)

Screw Back-cutting 27G 60mm 5-0 90mm (Major model)

PDO Screw - Detail (Table)
PDO Multi

Multi

3. PDO Multi

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

 

Multi L-Cannula 23G 38mm 5-0 25mm (Major model)

Multi L-Cannula 23G 60mm 5-0 45mm (Major model)

PDO Multi - Detail (Table)
PDO Cavern

Cavern

4. PDO Cavern

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

 

Cavern L-Cannula 23G 60mm 5-0 20mm

Cavern L-Cannula 23G 60mm 5-0 25mm

Cavern L-Cannula 23G 60mm 5-0 30mm (Major model)

PDO Cavern - Detail (Table)
PDO Cog B

Cog B (Cog)(Cog Base)

5. PDO Cog B

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

* Default cog type : CB4 (Please refer to the list below)

 

* We usually manufacture Cogs in 4 ways.

CB1 (ST, Straight Type) – in one direction

CB2 – 2 directions in 180º degrees

CB3 – 3 directions in 120º degrees

CB4 (SP, Spiral Type) – 4 directions in 90º degress (Major type)

 

Cog-B L-Cannula 19G 38mm 0-0 120mm (Major model)

Cog-B L-Cannula 19G 60mm 0-0 140mm (Major model)

Cog-B L-Cannula 19G 100mm 0-0 180mm (Major model)

PDO Cog B - Detail (Table)
PDO Cog N

Cog N (Cog Nose)

6. PDO Cog N

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

* Default cog type : CB4 (Please refer to the list below)

 

* We usually manufacture Cogs in 4 ways.

CB1 (ST, Straight Type) – in one direction

CB2 – 2 directions in 180º degrees

CB3 – 3 directions in 120º degrees

CB4 (SP, Spiral Type) – 4 directions in 90º degress (Major type)

 

Cog-N L-Cannula 19G 38mm +2 52mm (Major model)

Cog-N L-Cannula 19G 60mm +2 82mm (Major model)

Cog-N L-Cannula 19/21G  38mm 0-0/+1/+2 52mm

Cog-N L-Cannula 19/21G 60mm 0-0/+1/+2 82mm

PDO Cog N - Detail (Table)
PDO Mold B

Mold B (Mold)(Mold Base)

7. PDO Mold B

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

 

Mold B L-Cannula 18G 60mm +2 140mm (Also available)

Mold B L-Cannula 18G 100mm +2 180mm (Major model)

Mold B L-Cannula 18/19G 100mm 0-0 180mm

Mold B L-Cannula 18/19G 100mm +1 180mm

Mold B L-Cannula 18/19G 100mm +2 180mm

PDO Mold - Detail (Table)
PDO Mold N

Mold N (Mold Nose)

8. PDO Mold N

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

 

Mold N L-Cannula 20G 38mm +2 52mm (Major model)

Mold N L-Cannula 20G 60mm +2 82mm (Major model)

PDO Twin Cog

Twin Cog

9. PDO Twin Cog

* Default needle type : Blunt needle

* Default needle hub type : Assembly hub

* Default cog type : CB4 (Please refer to the list below)

 

* We usually manufacture Cogs in 4 ways.

CB1 (ST, Straight Type) – in one direction

CB2 – 2 directions in 180º degrees

CB3 – 3 directions in 120º degrees

CB4 (SP, Spiral Type) – 4 directions in 90º degress (Major type)

 

Twin Cog Blunt 19G 110mm 0-0 340mm (Major Type)

Twin Cog Blunt 19G 110mm +1 340mm (Major Type)

Twin Cog Sharp/Blunt 19G 110/120mm 0-0/+1/+2 300~340mm

Twin Cog Sharp/Blunt 19G 70/80/90/110/120mm 0-0/+1/+2 220/260/300/320/340/360/380/400/420/440/460/480/500mm

Sharp needle type is only available in non-EU countries.

PDO Twin Mold

Twin Mold

10. PDO Twin Mold

* Default needle type : Blunt needle

* Default needle hub type : Assembly hub

 

Twin Mold Blunt 19G 110mm +2 300mm (Major Type)

Twin Mold Blunt 19G 110mm +2 340mm (Major Type)

Twin Mold Blunt 19G 110mm +2 380mm (Major Type)

Twin Mold Blunt 19G 110mm +2 420mm (Major Type)

Twin Mold Blunt 19G 110mm +2 460mm (Major Type)

Twin Mold Blunt 19G 110mm +2 500mm (Major Type)

Twin Mold Sharp/Blunt 19G 70/80/90/110/120mm 0-0/+1/+2 220/260/300/320/340/360/380/400/420/440/460/480/500mm

Sharp needle type is only available in non-EU countries